D&D DesignTech’s Products
Sub-Surface Equipment – On the downhole side of the installations, D&D has created a product line consisting of the following: Chemical Injection Valves, Chemical Injection Check Valves/Mandrels and Corrosion Coupon Holder Assemblies.
Specifications
Connection: Threaded for 1/4”x20x2” Coupon
Size: 3/4” dia. (Other Available On Request)
Length: Lengths Up to 6ft
Temp: Insulator Available Up to 450 degrees F
Materials: ss Standard
Features
Integrated Cage for Protection
Easy Coupon Access
Designed for Monitoring Below Injection Valve
Rigid or Wobble Bar Adaptable
MADE IN THE USA
Specifications
Connection: 1/4″ or 3/8” Tubing
Size: O.D. .740″
Length: 8 1/2″
Crack Pressure: 150 Psig
MAOP: 8000 Psig
Flow: 5 GPM @ 250 Psig
Materials: Elastomers and Metal Determined by Application
Nose Connection: Bullet Guide Nose or 1/4” NPT Waggle/Weight Bar Adapter
Balls: Nickel Carbide
Springs: Inconel®
Seats: 1) Nickel Carbide and 1) Metal Used in Construction of Valve
Features
All 316 ss Construction
Ball Type Check Valve
SS Inlet Check Spring
MADE IN THE USA
Design Advantages
Size:
• Allows Entry Into Smaller Casings
• Integral Check Valve
• Eliminates Need For Additional Check
Quality:
• Highest Quality Balls, Seats, Elastomers and Springs
Options:
• Available Weight Bar/Waggle Adapter
• Different Elastomers and Alloys
Shape:
• Integral Guide Tool Design
• Helps Reduce Hang-ups
Information
The DCIM-2000 Mandrel is designed to provide a simple double check injection device. This valve uses a light weight spring and ball for both checks. Being a check valve this valve will be affected by well pressures.
Specifications
Connection: 1/4″ or 3/8” Tubing
Size: O.D. 1″
Length: 7.5″
Crack Pressure: 500-8000 Psig Adjustable
MAOP: 10,000 Psig
Flow: 1.5 GPM at a set pressure of 1000 Psi
Materials: Elastomers and Metal Determined by Application
Nose Connection: Bullet Guide Nose/Weight/Waggle Bar Adapter or Side Entry
Features
Fully Adjustable
Ball Type Inlet Check Valve
Inconel® Springs
Higher Set Pressure Ability
MADE IN THE USA
Design Advantages
Quality:
• Highest Quality Balls, Seats, Elastomers and Springs
Options:
• Available Weight/Waggle Bar Adapter Or Side Entry
• Different Elastomers and Alloys
Shape:
• Integral Guide Tool Design
• Helps Reduce Hang-ups
Information
The DCIV-6000 valve is designed to insure consistent
injection of chemicals via a downhole coil tubing string.
This device greatly reduces the possibility of free
flowing chemical into the well and back flowing into the
tubing string.
Specifications
Connection: 1/4″ or 3/8″ Tubing
Size: O.D. .750″
Length: 9.2″
Crack Pressure: 900-1800 Psig Semi-Adjustable
MAOP: 8000 Psig
Flow: 3 GPM @ 1500 Psig
Materials: Elastomers and Metal Determined by Application
Features
Double Check Valve Design
One ss Seat and One Carbide Seat
Nickel Carbide Balls
Inconel® Springs
All 316 ss Construction or Other Alloy
MADE IN THE USA
Design Advantages
Size:
• Allows Entry Into Smaller Casings
• Integral Check Valve
• Eliminates Need For Additional Check
Quality:
• Highest Quality Balls, Seats, Elastomers and Springs
Options:
• Available Weight Bar/Waggle Adapter
• Different Elastomers and Alloys
Shape:/
• Integral Guide Tool Design
• Helps Reduce Hang-ups
Information
The DCIV-8000 valve is capable of holding up to 1800
psi. back pressure. This device functions as a high
pressure spring loaded check valve, thus reducing the
possibility of free flowing chemical into the well and
back flowing into the tubing string due to changes in
well and tubing conditions or pressures. Being a check
valve by design this valve will be affected by well
pressures.
Specifications
Connection: 1/4″ Tubing
Size: O.D. .540″
Length: 4.9″
Crack Pressure: 1300-1500 Psig Non-Settable
MAOP: 3000 Psig
Flow: .5 GPM @ 1500 Psig
Materials: All 316 ss Construction
Nose Connection: Bullet Guide Nose
Features
Slim Hole Design
Single Check Valve
Non-Adjustable
MADE IN THE USA
Design Advantages
Size:
• Allows Entry Into Smaller Casings
• Integral Check Valve
• Eliminates Need For Additional Check
Shape:
• Integral Guide Tool Design
• Helps Reduce Hang-ups
Information
The DSIV-4000 valve is designed to provide a cost effective solution for injection valve entry into restricted spaces. While the O.D. of this valve is only .540” it is capable of holding up to 1500 psi. back pressure. This
device functions as a high pressure spring loaded check valve, thus greatly reducing the possibility of free flowing chemical into the well and back flowing into the tubing string due to changes in well and tubing conditions or pressures. Being a check valve by design this valve will be affected by well pressures.
Download Spec Sheet
Specifications
Length: 12” & 24” Lengths Standard
Connection: 1/4” MNPT Standard
Size: O.D. .730
Materials: All 316 ss Construction
Features
Other Alloys Available
Custom Sizes & Configurations
Weighted Well Entry Guide
MADE IN THE USA
Specifications
Connection: Threaded for 1/4”x20x2″ Coupon
Size: 1 1/2″ dia. (Others Available on Request)
Length: 7 1/2″
Temp: Insulator Available Up to 450 degrees F
Materials: ss Standard
Features
Integrated Cage for Protection
Easy Coupon Access
Designed for Monitoring Via Wireline Entry
Rigid Mount Designed For 3/4” Sucker Rod Connection
MADE IN THE USA
Specifications
Connection: Threaded for 1/4”x20x2″ Coupon
Size: 3/4″ dia. (Others Available on Request)
Length: Lenghts Up to 2ft
Temp: Insulator Available Up to 450 degrees F
Materials: ss Standard
Features
Integrated Cage for Protection
Easy Coupon Access
Designed for Monitoring Below Injection Valve
Wobble Bar Adapter
MADE IN THE USA
Specifications
Connection: 1/4″ or 3/8” Tubing
Size: O.D. .740″
Length: 5″
Crack Pressure: 150 Psig
MAOP: 8000 Psig
Flow: 5 GPM @ 250 Psig
Materials: Elastomers and Metal Determined by Application
Nose Connection: 1/2” Male NPT For Side Pocket
Balls: Nickel Carbide
Springs: Inconel®
Seats: 1) Nickel Carbide and 1) Metal Used in Construction of Valve
Features
Precision Ground Nickel Carbide Seat
Non-Adjustable
Double Check Valve
MADE IN THE USA
Design Advantages
Size:
• Allows Entry Into Smaller Casings
• Integral Check Valve
• Eliminates Need For Additional Check
Quality:
• Highest Quality Balls, Seats, Elastomers and Springs
Options:
• Tubing Connection Size 1/4″ or 3/8″
• Different Elastomers and Alloys
Shape:
• Integral Guide Tool Design
• Helps Reduce Hang-ups
Information
The DCIM-2MINI Mandrel is designed to provide a simple double check injection device for side pocket entry. This valve uses a light weight spring and ball for both checks. Being a check valve this valve will be affected by well pressure
